The glue
Adhesive Max
Stays liquid until the light comes on. You choose the moment each lash bonds.
- Clear and thin, with very low fumes
- No bonder needed
- For 395 to 420 nm lash lamps
UV lash extensions with Beautibeam: Cured by light.
Lash extensions applied with a glue that sets under a UV LED lamp, not with the moisture in the air. Also called UV lashes or LED lash extensions. The bond sets in 0.5 to 1 second and holds for 10 to 12 weeks.
The bottle
One clean drop at a time.
A thin, clear formula and a fine nozzle. One 5 mL bottle covers 70 to 100 appointments.
Still liquid
Nothing sets until you say so.
Humidity does not start the clock. You place the lash, then you decide when it bonds.
Light on
Then the light comes on.
A 395 to 420 nm LED lamp starts the cure. No waiting and no fanning.
0.5–1sec
Set.
A clear, solid bond. On to the next lash.
The Beautibeam system
One system. Three parts.
A glue that waits for light, a lamp that gives it exactly that light, and eyewear for the artist. Each part is made for the other two.
The lamp
Lumina Pro
PrecisionLED light at about 395 nm, switched by a foot pedal so both hands stay on the lash.
- 5 W LED
- Tested to 50,000 hours
- Flexible neck, waterproof body
Back soon
Tell me when it is back
The eyewear
Beam Guard
UV-protective glasses for the artist, light enough to forget you have them on.
- 25 grams
- Yellow tint, multi-layer protective coating
- Unisex
Black tape and under-eye patches complete the set-up, so only the lash line sees the light. Shop UV supplies
How it cures
Light, not moisture.
Regular lash glue sets when it meets moisture in the air, so the room decides how your glue behaves. Adhesive Max waits for light instead. It sets when a UV LED lamp shines on it, so you decide.
Regular lash glue
Sets with moisture.
Humidity and temperature change the speed. Too dry and it is slow. Too humid and it dries before the lash is placed.
40–60%
Typical working humidity
20–23 °C
Typical working temperature
Adhesive Max
Sets with light.
A second of light from a small UV LED lamp starts the bond. The same result in January and in July.
Any
Humidity
Any
Temperature
The lamp
PrecisionLED. One colour of light.
Lumina Pro's LED gives one narrow band of light at about 395 nm, where ultraviolet (UVA) meets visible violet: inside the 395 to 420 nm range that Adhesive Max cures under. A foot pedal switches it on and off, so the light is there for a second and gone.
Wavelength
395nm
One narrow band, where UVA meets visible violet.
Power
5W
Enough to set each bond in about a second.
LED life
50,000h
Tested hours of light.
Step by step
A full set with Beautibeam.
The lashing is the lashing you know: isolate, dip, place. What changes is the prep before the set, the second of light after each lash, and no more bonder needed.
Lamp distance
20cm
From the lens to the lash line.
Lamp angle
45°
Roughly, aimed along the lashes.
Light per lash
0.5–1sec
One press of the pedal.
-
Cleanse
Clean the natural lashes and the eye area before any tape goes on. Oil and make-up are what break a bond.
-
Cover
Tape the bottom lashes. Place the under-eye patches, black first and white on top. Cover the lids with three layers of black tape, 1 mm back from the lash line.
-
Position the lamp
About 20 cm from the lashes, at roughly 45 degrees. Put the pedal where your foot rests.
-
Test first
Cure a few extensions and adjust the distance and the angle until the bond sets in about a second. Then start the full set.
-
Dip, place, light
Dip the extension, place it, press the pedal. It is bonded before you reach for the next lash.
-
Finish
Lift the tape and patches gently. Fanning at the end is optional. Go through aftercare with your client as you always do.
For trained lash artists. The client's eyes stay closed and covered for the whole set, and we strongly advise the Beam Guard for the artist.
Comfort
Very low fumes. Clear bond.
A thin, crystal-clear formula, made with sensitive eyes in mind. Latex free, formaldehyde free and TPO free.
Fumes
Very low
Less to breathe in for you and your client.
Colour
Clear
No black dots at the lash line.
Viscosity
Thin
A small dip is enough.
Your day
Faster sets. More of them.
Each bond sets in about a second, so there is no waiting for glue to dry, and no bonder to buy.
Appointment time
−20%
Up to 20% shorter than with regular glue.
One 5 mL bottle
70–100
Appointments.
Glue per appointment
<$1
At $59 a bottle.
The film
The Beautibeam system in 44 seconds.
Lash artists on the Beautibeam system.
400+ reviews from lash artistsRead them all
“Before and after 4 week fill with my new uv led system by Beautibeam”
L.B.J.Lash artist, in a post
“OMG I am having so much fun opening the treasures and setting up. I love the design, packaging everything. Such a simple set up.”
J.L.Lash artist, in a message to us
“It’s been a game changer especially for my classic clients !!!”
M.B.Lash artist, in a message to us
“Okay LED classic growth & retention 😌”
M.B.Lash artist, in a post
“Everyday I have at least 2 inquiries 🥹❤️ I’m so excited ! Good job, your products SLAY. I trust you guys with my lifeeeee”
M.B.Lash artist, in a message to us
“My work load is CRAZY. I’m so impressed & happy ❤️
I had FULL faith ❤️”
M.B.Lash artist, in a message to us
“OBSESSED W/ THIS LED EXTRA SET 😍”
B.L.Lash artist, in a post
“LASHES DONE WITH THE BEST UV LIGHT AROUND!”
B.A.Lash artist, in a post
“First full set with the UV Light ! Absolutely loving it 😍”
C.Lash artist, in a post
“Oh la la! A new set of Classic Lash Extensions using the new lash system Beautibeam. LOVE IT”
K.B.Lash artist, in a post
“LED lashing has been such a successful and fun journey!”
E.B.S.Lash artist, in a post
“I’ve just started on my mannequin! This is amazing !”
K.C.B.Lash artist, in a message to us
The kit
No lamp yet? Ours is coming back.
Adhesive Max works with a UV LED lash lamp that puts out 395 to 420 nm at about 5 W. Our own UV Lash System kit is being restocked: the Lumina Pro lamp, a bottle of Adhesive Max, Beam Guard eyewear, two rolls of black tape and 50 black under-eye patches, with a 1-year warranty. Leave your email and we will tell you the day it is back.
Done. We will email you when they are back.
Beautisupply
Our two glues.
Beautibeam is one line of Beautisupply. For lashing without UV LED there is Adhesive Pro, the best standard glue.
Beautibeam · UV glue
Adhesive Max
For UV LED lashing: the bond waits for your lamp.
- Sets in 0.5 to 1 second under the lamp
- Holds for 10 to 12 weeks
- Clear bond, in any humidity
Beautisupply · regular glue
Adhesive Pro
For classic and volume sets, no lamp needed.
- Dries in about 1 second
- Holds for 7 to 8 weeks
- Rich black bond, very low fumes
Questions, answered.
What are UV lash extensions?
Lash extensions applied with a light-cured glue. The glue stays liquid until a UV LED lamp shines on it, then sets in about a second, which gives a bond that is the same on every lash. You will also see them called UV lashes, LED lash extensions or UV LED lashes: it is the same method.
Are UV lash extensions safe?
Used as directed, the exposure is small: low-power light at around 395 nm, for about a second per lash. Under-eye patches and black tape cover the client's skin, the client's eyes stay closed, and we strongly advise UV-protective eyewear for the artist. Follow the guide for every set. UV lash safety, with the figures
Are UV lash extensions better than regular lash extensions?
They give the longer-lasting bond, and it sets when you switch on the lamp, in any humidity. The method uses a UV LED lamp, and the client's lids and under-eyes are covered for every set. For artists who do not use UV LED, regular glue is the right choice, and Adhesive Pro is the best standard glue. UV or regular glue: what changes
How long do UV lash extensions last?
With correct application and aftercare, 10 to 12 weeks, or until the natural lash sheds. What makes a set last
How are UV lash extensions removed?
With a lash remover, the same kind used for regular lash glue. Removal is a job for a lash artist.
How do you care for UV lash extensions?
The same way as any lash extension set: go through your usual aftercare with your client. Once cured, the bond resists water and oil.
Is it UV or LED?
Both. The lamp is an LED, and its light is at about 395 nm, where ultraviolet (UVA) meets visible violet. That is why the same method is called UV, LED and UV LED lashing. LED lash extensions, explained
Which lamp do I need?
A UV LED lash lamp that puts out 395 to 420 nm at about 5 W. A lamp that emits only around 365 nm is outside that range, so check your lamp's wavelength before you buy the glue. Ours is the Lumina Pro, in the UV lash kit.
Is there help to get started?
Yes. The step-by-step application guide is on this site for anyone to follow, and our own team answers technique questions every day, 8am to 8pm. The UV Lash System kit, when it is back, also comes with assembly instructions. Support has the set-up and troubleshooting answers.
Adhesive Max
The glue professionals reorder.
UV lash glue, 5 mL. For trained lash artists.